1.The Pause control counter indicates the number of times the router requests another router to slow the traffic.
2.For example, two routers, Router A and Router B, are connected through a link with flow control enabled. If Router B faces a traffic burst, Router B sends a Pause output packet to inform Router A to slow the traffic because the link is oversubscribed. At that time, Router A receives a Pause input packet that informs it of the request sent by Router B
3.Pause output / input packets are not a problem or an error.
4.They are simply flow control packets between two devices.
5.In your case, output PAUSE, this device is sending PAUSE requests to peer device.
Does anyone have or know of any Powershell scripts to collect information from Cisco switches (Nexus, layer 2) and output to csv or Excel? Need to document a number of Cisco switches with port, vlan, routes, ACL information. Thanks
Community Live- Basic Wireshark for Networking Students
(Live event - formerly known as Webcast- Tuesday 14 April, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 14th, April 2020 at 10hrs PDT
Cisco IOS-XE 17.2.1 – Catalyst Switching Updates
Cisco has announced the availability of the latest IOS-XE release - IOS-XE Amsterdam 17.2. This release IOS-XE 17.2 is the next Standard Maintenance Release after 17.1 which also has a sustaining lifetime o...
In this article, we are going to talk about Cisco Umbrella Initial Setup.- The continuity of IT is the basis of today’s business environment. Almost every single decision made by business is either based on an IT data or done using the IT platform. And so...