has a "Table 6. Essentials and Advantage Package Features" that helpfully lists the various features available with various licenses -- but there are a few huge red flags, and I was hoping I could get some feedback here.
If I read it correctly:
Flexible Netflow, Wireshark, containers, EEM, Python, Encrypted Traffic Analysis etc. are not available with either Network Essentials or Network Advantage.
Patching and MacSec is available with Network Essentials, but not with Network Advantage?
I'm really hoping I'm missing something here, and Cisco didn't just turn off a bunch of the most desirable features of their new platform for licensing reasons.
PRTG system in place running other sensors on the same host, which are working. Ive added syslog receiver sensor and receiving PRTG data from switch that increases drops, errors and warning stats that disappear after a few minutes. Within mess...
Hi, here is an example how to configure IP-NAT, GRE, IPSEC. I've seen plenty of questions and this might be a good solution! (Mostly the use of commands that might remind u) IP NAT======================================================================...
Hi everyone.I have a problem in my Network.So i have 3 routers and a firewall in my topology. I have configured OSPF and all routers works expect R3 (see in the image below)When I watch my neignbor in R3 it says :192.168.7.7 1 INIT/DROTHER 00:00:37 10.0.2...
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static" approach as oppose to the dynamic and secure approach using&nbs...