03-01-2022 12:40 AM
Hi,
I have a "notconnect" issue for the100G breakout to 4x 25G.
. Both 9500-32C and 9500-48Y4C are updated to latest version 17.07.1.
. The Cisco breakout cable is connected,100G on 9500-32C and 25G on 9500-48Y4C.
. The breakout cable is QSFP-4SFP25G-CU1M.
. set breakout command "hw-module breakout 1" on 9500-32C
The 9500-32C port 1 shows "inactive" which is normal.
Howerver the breakout ports shows "notconnect".
Hu1/0/1/1 notconnect 1 full 25G QSFP28 4S FP25G CU1M
Is there anything I missed?
Any suggestions will be appreciated.
Thanks.
J.H
03-01-2022 02:18 AM
- Anything in the logs of both devices when connection attempt is being made ?
M.
03-02-2022 10:45 PM
Finally, I got the soluation.
The C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models of the Cisco Catalyst 9500 Series Switches do not support autonegotiate.
So I need to do "speed nonegotiate" both on the 100G interface (9500-32C) and 25G interface (9500-48Y4C).
J.H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide