cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
586
Views
0
Helpful
3
Replies
raghx2000
Beginner

CatOS 6500 8.x to IOS 12.2SX qos

Hi All,

What is the replacement command in IOS 12.2SX for CatOS 8.x set qos policer aggrereate? Should the IOS12.2SX mls qos aggregate-policer is the same?

Please help!

Regards

3 REPLIES 3
Chaitra Shree
Cisco Employee

Yes, thats correct. set qos policer aggrereate in CATOS is same as mls qos aggregate-policer in IOS.

Regards,

Chaitra

Thanks Chaitra,

So I guess the below would be a valid replacement. Please confirm.

CatOS

set qos policer aggregate $VLAN_Name rate $bw_rate burst $burst_size drop

IOS

set mls qos aggregate-policer $VLAN_Name rate $bw_rate burst $burst_size drop

Regards,

Hi,

Here are the exact commands  :

CATOS :

set qos policer {aggregate aggregate_name} {rate rate} { burst burst } { droppoliced-dscp }

IOS:

mls qos  aggregate-policer name rate-bps [normal-burst-bytes [maximum-burst-bytes | pir  peak-rate-bps | action-type action]]

The below links might be helpful:

IOS:

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp1041087

CATOS:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/6.x/command/reference/set_po_r.html#wp1028465

Regards,

Chaitra