CatOS 6500 8.x to IOS 12.2SX qos

[raghx2000]

Hi All,

What is the replacement command in IOS 12.2SX for CatOS 8.x set qos policer aggrereate? Should the IOS12.2SX mls qos aggregate-policer is the same?

Please help!

Regards

[Chaitra Shree]

Yes, thats correct. set qos policer aggrereate in CATOS is same as mls qos aggregate-policer in IOS.

Regards,

Chaitra

[raghx2000]

Thanks Chaitra,

So I guess the below would be a valid replacement. Please confirm.

CatOS

set qos policer aggregate $VLAN_Name rate $bw_rate burst $burst_size drop

IOS

set mls qos aggregate-policer $VLAN_Name rate $bw_rate burst $burst_size drop

Regards,

[Chaitra Shree]

Hi,

Here are the exact commands  :

CATOS :

set qos policer {aggregate aggregate_name} {rate rate} { burst burst } { drop |  policed-dscp }

IOS:

mls qos  aggregate-policer name rate-bps [normal-burst-bytes [maximum-burst-bytes | pir  peak-rate-bps | action-type action]]

The below links might be helpful:

IOS:

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp1041087

CATOS:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/6.x/command/reference/set_po_r.html#wp1028465

Regards,

Chaitra