06-30-2011 03:10 AM - edited 03-07-2019 01:02 AM
Hi All,
What is the replacement command in IOS 12.2SX for CatOS 8.x set qos policer aggrereate? Should the IOS12.2SX mls qos aggregate-policer is the same?
Please help!
Regards
06-30-2011 04:02 AM
Yes, thats correct. set qos policer aggrereate in CATOS is same as mls qos aggregate-policer in IOS.
Regards,
Chaitra
06-30-2011 04:13 AM
Thanks Chaitra,
So I guess the below would be a valid replacement. Please confirm.
CatOS
set qos policer aggregate $VLAN_Name rate $bw_rate burst $burst_size drop
IOS
set mls qos aggregate-policer $VLAN_Name rate $bw_rate burst $burst_size drop
Regards,
06-30-2011 06:09 AM
Hi,
Here are the exact commands :
CATOS :
set qos policer {aggregate aggregate_name} {rate rate} { burst burst } { drop | policed-dscp }
IOS:
mls qos aggregate-policer name rate-bps [normal-burst-bytes [maximum-burst-bytes | pir peak-rate-bps | action-type action]]
The below links might be helpful:
IOS:
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp1041087
CATOS:
Regards,
Chaitra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide