cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
25719
Views
15
Helpful
5
Replies
aadilovic
Beginner

CDP on ASA 5510

hallo,

How can i ENABLE CDP on ASA 5510.

thx

1 ACCEPTED SOLUTION

Accepted Solutions

CDP is not supported on ASA or PIX. What you can do is speak to cisco about it if you need it. maybe they can make it available on the next ASA software version.

Please rate if this helps.

Franco

View solution in original post

5 REPLIES 5
shrikar.dange
Beginner

Hi,

AFAIK CDP is enabled by default on all cisco platforms.You can enable it manually in global config mode with following command:

Router(Config)#cdp run

But in case of ASA it is not enabled by default(In my knowledge).Also it depends on the Software version you are running.

Please chk this URL:

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/index.htm

HTH,

regards,

shri :)

I was try everything but with no success.

any other suggestions?

thx

CDP is not supported on ASA or PIX. What you can do is speak to cisco about it if you need it. maybe they can make it available on the next ASA software version.

Please rate if this helps.

Franco

View solution in original post

thank you so much

regards

you are welcome.

Franco