cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1457
Views
0
Helpful
3
Replies

CE500 Switchport port-security

Hi !!!


i try change the configuration the port in the switch catalyst express 500, i need disable switchport port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switchport port-security configuration again.


do you know solve this??


thk and regards!!!

1 Accepted Solution

Accepted Solutions

fb_webuser
Level 6
Level 6

Try copy running-config startup-config command in lieu of wr

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

View solution in original post

3 Replies 3

fb_webuser
Level 6
Level 6

Try copy running-config startup-config command in lieu of wr

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

Hi

Yes i try with copy run star comman, but I reboot the switch CE500 and the configuration the port appear switchport port-security again.

De: fb_webuser

Enviado el: viernes, 20 de abril de 2012 10:38 a.m.

Para: Josué Jonathan Rivero Herrero

Asunto: - Re: CE500 Switchport port-security

Home<>

Re: CE500 Switchport port-security

created by Web User<> in LAN, Switching and Routing - View the full discussion<>

I try with the configuration default on port and wr, restart the switch and I configure the port again an save configuration, restart the switch. the trouble is solved.

Review Cisco Networking for a $25 gift card