04-20-2012 07:25 AM - edited 03-07-2019 06:15 AM
Hi !!!
i try change the configuration the port in the switch catalyst express 500, i need disable switchport port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switchport port-security configuration again.
do you know solve this??
thk and regards!!!
Solved! Go to Solution.
04-20-2012 08:37 AM
Try copy running-config startup-config command in lieu of wr
---
Posted by WebUser Neeraj Jagga from Cisco Support Community App
04-20-2012 08:37 AM
Try copy running-config startup-config command in lieu of wr
---
Posted by WebUser Neeraj Jagga from Cisco Support Community App
04-20-2012 09:06 AM
Hi
Yes i try with copy run star comman, but I reboot the switch CE500 and the configuration the port appear switchport port-security again.
Enviado el: viernes, 20 de abril de 2012 10:38 a.m.
Para: Josué Jonathan Rivero Herrero
Asunto: - Re: CE500 Switchport port-security
Home<>>
Re: CE500 Switchport port-security
created by Web User<> in LAN, Switching and Routing - View the full discussion<>>>
10-17-2012 04:31 PM
I try with the configuration default on port and wr, restart the switch and I configure the port again an save configuration, restart the switch. the trouble is solved.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: