cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1102
Views
0
Helpful
3
Replies

CE500 Switchport port-security

Hi !!!


i try change the configuration the port in the switch catalyst express 500, i need disable switchport port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switchport port-security configuration again.


do you know solve this??


thk and regards!!!

1 Accepted Solution

Accepted Solutions

fb_webuser
Frequent Contributor
Frequent Contributor

Try copy running-config startup-config command in lieu of wr

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

View solution in original post

3 Replies 3

fb_webuser
Frequent Contributor
Frequent Contributor

Try copy running-config startup-config command in lieu of wr

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

Hi

Yes i try with copy run star comman, but I reboot the switch CE500 and the configuration the port appear switchport port-security again.

De: fb_webuser

Enviado el: viernes, 20 de abril de 2012 10:38 a.m.

Para: Josué Jonathan Rivero Herrero

Asunto: - Re: CE500 Switchport port-security

Home<>

Re: CE500 Switchport port-security

created by Web User<> in LAN, Switching and Routing - View the full discussion<>

I try with the configuration default on port and wr, restart the switch and I configure the port again an save configuration, restart the switch. the trouble is solved.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers