02-06-2014 07:27 AM - edited 03-07-2019 06:03 PM
Hi ,
How we can check the chassis serial number ( Not Process ID).
My switch is Cisco WS-C6509. Show Inventory and Show Diag is not working in this switch.
Is there any other cmd for getting the chassis S/N.
02-06-2014 10:24 AM
Hi,
you could try 'show snmp', normally the first line shows the SN as well.
I wonder why show inventory doesn't work. What IOS version are you running?
HTH
Rolf
Sent from Cisco Technical Support Android App
02-06-2014 10:28 AM
I also wonder why show inventory doesn't work, but if you do a show ver, the Processor board ID is the Chassis serial number...at least it matches mine.
HTH,
John
*** Please rate all useful posts ***
02-08-2014 01:12 PM
I confirm this,
Br,
Jean-Yves
02-07-2014 05:42 PM
That's wierd. I always use "sh inventory raw" and the first line is the chassis' serial number. If not, then if you haven SNMP enabled, use the command "sh snmp" and it'll come up as well.
02-07-2014 05:44 PM
Show idprom chassis or show idprom backplane . If it's really old and its a hybrid box seems like it was show system or something like that on catos.
02-08-2014 11:22 AM
Try show version ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: