Cisco 1811

[Thomas Summers]

I have enherited a netwrok utilizing a Cisco 2960G switch, Cisco 1811 router with a Pix-506e.  Currently there are two vlans configued on the router and the 2960 switch.  Vlan1 10.255.1.0/27 and Vlan 2 192.168.1.0/24.  The folks that own the network need one IP of 192.168.1.57 to be able to get out to an IP address of 199.48.213.150.  From the firewall I am able to ping this IP,199.48.213.150, but not from the router or switch.                 

[stephen.stack]

I strongly recommend you remove your attachments as soon as possible. And upload relevant sanitized configurations only. Uploading your entire firewall configuration. Is not a good idea, at all!

==========================
http://www.rConfig.com 

A free, open source network device configuration management tool, customizable to your needs!

- Always vote on an answer if you found it helpful