07-10-2012 01:03 PM - edited 03-07-2019 07:42 AM
Hello people....
My configuration is the following
Router ISP >>> Switch 2940 >>> Router 2620 >>> Host (Tacking dhcp from my 2620)
I got servers and other switches 2950 working perfect from the 2940....but the 2620 or even a Switch 3550 (in router L3 port), has the same issue...do not share connection with Host's behind them, I got IP on the host, pinging the Fa0/1 (dhcp), pinging the Fa0/0, but cannot ping the GATEWAY and not surf the internet...
Somebody can help with this? THANK YOU.
1380NE#sr
Building configuration...
Current configuration : 1913 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 1380NE
!
boot-start-marker
boot-end-marker
!
enable password xxxxxx
!
no aaa new-model
ip subnet-zero
ip cef
!
!
ip name-server 8.8.8.8
ip dhcp excluded-address 192.168.0.1 192.168.0.100
!
ip dhcp pool SHARED
network 192.168.0.0 255.255.255.0
dns-server 192.168.0.1 8.8.8.8 4.4.4.4
default-router 192.168.0.1
!
!
!
!
!
class-map match-any voip
match protocol rtp
class-map match-any http
match protocol http
match protocol secure-http
class-map match-any p2p
match protocol gnutella
match protocol gopher
match protocol kazaa2
match protocol napster
class-map match-any ftp
match protocol ftp
match protocol secure-ftp
!
!
policy-map UP
class http
police cir 1500000
conform-action transmit
violate-action drop
policy-map TEST
class ftp
police cir 512000
conform-action transmit
violate-action drop
class http
police cir 8000000
conform-action transmit
violate-action drop
class p2p
police cir 1024000
conform-action transmit
violate-action drop
class voip
police cir 1500000
conform-action transmit
violate-action drop
priority percent 50
!
!
!
interface FastEthernet0/0
bandwidth 30000
ip address 173.xxx.xxx.90 255.255.255.240
ip nat outside
duplex auto
speed auto
service-policy output UP
!
interface FastEthernet0/1
ip address 192.168.0.1 255.255.255.0
ip nat inside
duplex auto
speed auto
service-policy output CCNA
!
router rip
version 2
network 173.199.0.0
network 192.168.0.0
!
ip http server
ip classless
!
!
access-list 101 permit ip any any
snmp-server community CiscoNet RO
alias exec s show ip int br
alias exec sr show run
alias exec c conf t
!
line con 0
line aux 0
line vty 0 4
password xxxx
login
line vty 5 15
login
!
!
end
1380NE#
1380NE#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
173.xxx.0.0/28 is subnetted, 1 subnets
C 173.xxx.xxx.80 is directly connected, FastEthernet0/0
C 192.168.0.0/24 is directly connected, FastEthernet0/1
Solved! Go to Solution.
07-10-2012 01:59 PM
07-10-2012 01:33 PM
You have the interfaces with nat inside|outside but you are lacking the complete NAT configuration.
07-10-2012 01:42 PM
sorry as you can see I am new on this, could you please help with it? just standart to understand...thanks! (still learning!)
07-10-2012 01:59 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: