I've been trying to wrap my head around this problem. I just installed a new server (Synology RS3416xs+ with Intel X520-DA2 CNA) today and attempted to attach the SFP+ cabling to our Cisco 2960-S Switch. I keep getting this error: "Te1/0/1: This port has been disabled because Non Compliant Gigabit Interface Converter (GBIC) connector detected."
What is bizarre is that I'm using Cisco cables (SFP-H10GB-CU1M) to connect. I purchased these cables from LANstreet and they appear to be genuine Cisco SFP+ cables/connectors.
Anyone have any idea as to how to resolve this problem?
Using the Cisco WS-C2960S-48TD-L Catalyst switch.
I'm attempting to attach the Te1 and Te2 ports (ultimately to be aggregate ports) on the switch to a Synology RS3416xs+ using an Intel X520-DA2 CNA. This card is 10GB and certified to work with the Synology server. The server sees the CNA just fine. The only error I'm getting is from the Switch saying that the GBIC's are non-compliant even though they are authentic Cisco SFP+ cables.
I'm fairly new to the deeper levels of switch management. So I'm a bit confused that these are coming up as non-compliant.