04-26-2019 02:15 AM
05-07-2019 04:38 AM
05-07-2019 05:32 AM
05-07-2019 05:42 AM
05-07-2019 05:53 AM
05-07-2019 05:59 AM
interface GigabitEthernet3/0/41
description "PC e SoftPhone"
switchport access vlan 246
switchport mode access
switchport voice vlan 192
authentication event fail action authorize vlan 30
authentication event server dead action authorize vlan 246
authentication event no-response action authorize vlan 30
authentication order dot1x
authentication port-control auto
dot1x pae authenticator
dot1x timeout tx-period 15
dot1x timeout auth-period 40
spanning-tree portfast
spanning-tree bpduguard enable
Giallo_5#show port-security int gi3/0/41
Port Security : Disabled
Port Status : Secure-down
Violation Mode : Shutdown
Aging Time : 0 mins
Aging Type : Absolute
SecureStatic Address Aging : Disabled
Maximum MAC Addresses : 1
Total MAC Addresses : 0
Configured MAC Addresses : 0
Sticky MAC Addresses : 0
Last Source Address:Vlan : 001e.135c.8958:192
Security Violation Count : 0
05-07-2019 06:02 AM
05-07-2019 06:09 AM
05-07-2019 06:22 AM
05-07-2019 07:34 AM
05-07-2019 08:07 AM
05-08-2019 11:05 PM
I ran the update, and it looks like everything works for the dot1x part. I noticed that the problem of unreachability of the printer after one day seems to be solved by removing port security on the port configuration. Isn't that these firmware have a system that hides doors that don't do traffic?
05-22-2019 06:34 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide