03-11-2019 10:15 AM
Hi fellas,
I upgraded IOS-XE on a 3650 switch from version 03.07.05E to Denali 16.03.07 and now it takes more than 2 hours to fully boot. I downgraded it to version 03.07.05E and problem is the same. I also tried Everest 16.06.05 but no help. Has anyone experienced this issue? The boot loader is version 4.66 after upgraded to Denali.
03-11-2019 11:22 AM
03-11-2019 12:37 PM
Hi,
That is not correct behavior. From one major upgrade to another the maximum boot time is 20 minutes. I would open a ticket with TAC and have them look into it.
HTH
05-22-2019 02:25 AM
I had same problem when upgrading from v16.9.1 to v16.9.3. It took more than 2 hours (2.5hours) to fully boot switches. I had this issue with more than 5 switches and all of them are CAT3650. This cause long down time to our production environment :-(((((. Some of CAT3650 and CAT3850 didn't take that long time to boot up., but......
I upgraded due to memory leakage on SASRcvWQWrk2 process. but looks like the memory leakage is still remaining and this will be fixed in next release: 16.9.4 that is planned for middle of August 2019 and 16.12.1 that is planned for the beginning of August 2019. So this mean I've to go through all this "#¤"# again..... and the customer will not be happy at all because of the long boot time/down time . The maintenance window is just 1.5 hours every night........!!!!!
Message on the console was: Loading image into memory........
Regards
Al
07-30-2019 02:41 AM
any bugs id to trace that issue?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide