We have configured Cisco 3750X POE series switchs with Stack.WS-C3750X-48P each with Redundant 1100W & 715 W PSU's. They are configured with Stack-Power in Sharing mode and the switches are Smart Stacked as well.
IP Phone and Access points are connected its working in last two years,
Now we are facing some issue on Cisco IP Phone and Access point,
When i have problem if unplug (disconnect & Reconnect) the IP Phone from Switch port, Power is not comming on switch port.
Plug it into another switchport of the same Switch it may not power in any port.
I tried shut & no shut and reconfigured on switch port , I have verified multiple switch ports same issue on the switch I have changed cable.
IOS Runing on Switches c3750e-universalk9-mz.122-53.SE2.bin
Cisco IOS-XE 17.3.1 – Catalyst Switching Updates
Table of Contents
Hardware Additions since IOS-XE 17.2.1
Key Summary Features
Platform and Infra Features
High Availability Features
Routing / MPLS / VPN Features
Hi Everyone,I have 2 queries1. After we configure the IPSec VPN in a Cisco Router, how do we identify and check that the traffic is flowing through the tunnel? Are there any commands and ways to find it out?2. What are some of t...
Cisco Champion Radio · S7|E29 Increase Visibility and Enhance Security with Cisco AI Endpoint Analytics
Cisco is on a journey to making networking smarter with artificial intelligence and machine learning. The latest stop in this journey, Cisco AI...
Community Live video- Introduction to Smart Licensing on Catalyst Switches
(Live event - formerly known as Webcast- Thursday 30 July, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Thursday 30th, July 2020 at 10hrs PDT&nb...