CISCO 3845 - WIC-1B-S/T NOT RECOGNIZED

[gses]

Dear Sir,

We have Cisco 3845 Router.I inserted the WIC-1B-S/T - 1 port isdn bri card to the HWIC Slot.but it it not recognized.

Kindly help me to find out the solution.

Thanks in advance.

regards

nagarajan

hyundai motor india

[Georg Pauwen]

Hello Nagarajan,

looking at the data sheet (see link below) it appears that the WIC-1B-S/T is not supported on the 3845, you need the WIC-1B-S/T-V3, as well as IOS 12.3(11)T...

Cisco 3800 Series Integrated Services Routers

Data Sheet

http://www.cisco.com/en/US/products/ps5855/products_data_sheet09186a0080091b87.html

HTH,

GP

[sushilk]

Hi,

Cisco ISR router does nto support WIC-1B-S/T. They supports a newer version od BRI cards which is WIC-1B-S/T-v3.

On router run show diag command. There in the wic slot if you see on WIC-1B-S/T then you need to change the card and have to get this newer version. Otherwise it may be some other issue.

If you find any difficulty in reading that output just send it across and I will help you finding the issue.

Regards,

Sushil