09-01-2016 12:59 PM - edited 03-08-2019 07:16 AM
I have a failed cisco 3850. I got a new switch in and the IOS was lower than my current stack so i upgraded it . When i do a show ver the IOS looks right but when i do a show switch the H/W version are different. This will cause my stack to fail ?
Solved! Go to Solution.
09-01-2016 01:18 PM
Hi Kurt,
That will not cause the stack to fail, you just need to make sure that the IOS version and the license level are the same between the stack members and make sure to power down the new switch before connecting it into the stack.
HTH
Julio
09-01-2016 01:18 PM
Hi Kurt,
That will not cause the stack to fail, you just need to make sure that the IOS version and the license level are the same between the stack members and make sure to power down the new switch before connecting it into the stack.
HTH
Julio
11-04-2020 09:17 PM
Hi
I am observing the same issue in 3650 and due to this i am unable to change the priority of my stack.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide