Cisco 4900M Vlans not turning up

[ashah1311]

Hello,

As we would do on any cisco 4900M,

I have the vlan created and int vlan with an ip address and also a port on that vlan. But still when i do sh ip route for that IP, it routes to null route instead of that vlan.

[Reza Sharifi]

Hi,

Is the vlan interface in up and up mode?

Also, can you post relevant config?

HTH

[ashah1311]

The vlan interface is not in up/ up mode. Thats the issue ! It shows down/down .

[Reza Sharifi]

Can you post the config as well as the access port added to this vlan?

What is connected to the switch?  Do you see the MAC address?

[ashah1311]

VLAN Name                             Status    Ports

xxx  ABC                            active    Gi2/1

interface GigabitEthernet2/1

switchport access vlan xxx

switchport mode access

spanning-tree portfast

end

There is nothing connected on the interface at the moment ...

[ElikCyber]

Here is the running config, with senstive IP information blotted out:

I also included the show ip route for the gateway to show the issue:

[Reza Sharifi]

For testing, can you connect a device to port 2/1 and see if the vlan interface comes up?

[ashah1311 · Accepted solution]

Thank you everyone ! we were able to connect a test server and the port came up.