cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
718
Views
0
Helpful
5
Replies
Highlighted
Beginner

Cisco 6500 - removing module image

Hi,

I have a Cisco 6500, reshuffled the cards around but now I have slots 5 and 6 as 24-port SFP blades however these slots are physically empty.  I need to do some house cleaning but dont know how to reset or clear what was in slots 5 and 6.  Let me know how to clear.

-Mn

5 REPLIES 5
Highlighted
Hall of Fame Guru

You need to do either -

1) add this to your config and save -

6500(config) module clear-config

but the module needs to be in the slot you are removing it from before you enter this command. If you remove the module first then apply this command it will not remove the config for the module you have removed

or

2) manually removed the config for the module

or

3) reboot the switch

Jon

Highlighted

How do I manually remove the configs?  The cards are seated in the correct slots already.

-Mn

Highlighted

From memory you can just do a "no int " for each interface in the old slot. 

Jon

Highlighted

Had to reboot since trying to remove the individual interfaces did not work.

-Mn

Highlighted

Okay, apologies, my memory must be going

Content for Community-Ad