cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1975
Views
0
Helpful
4
Replies

Cisco 6506-E Replacement and support for replacement

otislee
Level 1
Level 1

Hi Community,

 

Somewhat new to networking but I was recently tasked with finding a replacement for a Cisco 6506-e and also getting support to help move the config from the 6506-e to the new appliance. Any help with this or point me in the right direction would be much appreciated.

4 Replies 4

marce1000
Hall of Fame
Hall of Fame

 

 - The thread below gives some hints : 

                      https://community.cisco.com/t5/switching/what-switch-to-replace-6509/td-p/3695353

  Also have a look at : 

                https://www.cisco.com/c/en/us/products/switches/switch-selector.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Joseph W. Doherty
Hall of Fame
Hall of Fame
The most "like" replacement would be the 9407 (which is sort of the newer version of the 4507).

Scott Hodgdon
Cisco Employee
Cisco Employee

otislee,

Is this being used for user access (PoE, 10/100/1000, etc) or Dist / Core (10G agg, no PoE, etc) ? Can you provide a full "show module" output ? That may help to determine which replacement is most appropriate.

Cheers,
Scott Hodgdon

Senior Technical Marketing Engineer

Enterprise Networking Group

Leo Laohoo
Hall of Fame
Hall of Fame
What port density are you "chasing" for? 1-, 10-, 40- or 100 Gbps?