Cisco 6509 Catalys - VSS

[opnineopnine]

Hello,

With a 6509 catalyst configured with vss can I configure  port-channel?

Thanks.

148

[Rajeshkumar Gatti]

The VSS just aggregates 2 switches into one logical entity with a single control plane.

Port channel configuration is exactly the same as what you could do on a standalone 6500.

-Raj

[opnineopnine]

Hello Rajeshkumar,

thanks for you update, so I can create a port-channl on any catalyst and IOS device with VSS configured?

thanks.!

270

[Rajeshkumar Gatti · Accepted solution]

Yes. That should not be an issue

From my lab where we have port chnanel configured.It includes the VSL links as well.

S720_VSS#sh etherc sum <snip>

Group  Port-channel  Protocol    Ports
------+-------------+-----------+-----------------------------------------------
10     Po10(RU)         -        Te1/5/4(P)     Te1/5/5(P)     Te1/6/4(P)     
                                 Te1/6/5(P)     
20     Po20(RU)         -        Te2/5/4(P)     Te2/5/5(P)     Te2/6/4(P)     
                                 Te2/6/5(P)     
30     Po30(SD)         -        
31     Po31(SD)         -        
64     Po64(SU)        LACP      Gi1/5/3(P)     Gi1/6/3(P)     Gi2/5/3(P)     
                                 Gi2/6/3(P)     

-Raj