cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
538
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco 6509 Sup2 to Sup32 upgrade

Hi,

I need to upgrade 2xsup2 module to 2xsup32 on my cisco 6509. I just found out that I can not have the CISCO WS-X6500-SFM(Cisco Switch Fabric Module switch) with Sup32 and I have to remove 2 xCISCO WS-X6500-SFM2 modules from the switch.I am using this switch as a access switch and most of the ports are 100Mbps.

Could you please let me know if the upgrade would be safe or not as far as the bandwitdh?

Thanks,

Mike

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Expert
2 REPLIES 2
Highlighted
Hall of Fame Expert

Hi,

What is the model number for the 100Mbps blade you are currently using?

From Sup-32 Q&A

Q. Which line cards are supported by Sup32?

A. All classic line cards and all CEF256 line cards (without a Distributed Forwarding Card [DFC]) are supported at FCS.

Q. Which line cards are not supported by Sup32?

A. The following series of line cards are not supported by Sup32: WS-X67XX, WS-X68XX, SFM, and DFC-based cards.

HTH

Highlighted
Hall of Fame Expert
Content for Community-Ad