Dear All,
could you please help me resolve this problem..?
I'm using Cisco 819-HG-4G-G-K9 Router, Due to Full disk we try to Format Secondary disk to get some disk space ,but accidentally we choose main flash:0 memmory.. now there is no ios or bootLDR in flash...
i try to connect through xmodem and also tftpdnld ...but no response ...!
the followed steps which i have done to troubleshoot i'm mentioning below.. and please help me to solve this issue..!
1--------------------------------------------------
rommon 8 > sysret
System Return Info:
count: 19, reason: reset
pc:0x0, error address: 0x0
Stack Trace:
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
FP: 0x00000000, PC: 0x00000000
--------------------------------------------------------------
rommon 11 > context
No context available
rommon 5 > rommon-pref
usage: rommon-pref [readonly|upgrade]
rommon 6 > showmon
Last Reset Reason: System Reset
---------------------------------------------------------------------
rommon 2 > showmon
Last Reset Reason: System Reset
ReadOnly ROMMON version is:
System Bootstrap, Version 15.2(2r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2014 by cisco Systems, Inc.
No upgrade ROMMON version present
ReadOnly ROMMON currently running
ReadOnly ROMMON is selected for next boot
-----------------------------------------------------------------
rommon 3 > meminfo
-----------------------------------------------------
Current Memory configuration is:
On-board: Size = 1024 MB : Start Phy Addr = 0x0_00000000
-----------------------------------------------------
Main memory size: 1024 MB in 32 bit mode.
Available main memory starts at 0x1008000, size 1032160KB
Smart Init is enabled.
NVRAM size: 256 KB
Manufacturer's JEDEC ID code:
On-board: JDEC ID is not available
------------------------------------------------------------------------------
rommon 25 > set
PS1=rommon ! >
RTC_STAT=0
LICENSE_BOOT_LEVEL=
FE_SPEED_MODE=4
FE_PORT=0
TFTP_RETRY_COUNT=20
WARM_REBOOT=FALSE
RELOAD_TYPE=1
IP_ADDRESS=192.168.10.2
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.10.1
TFTP_SERVER=192.168.10.45
TFTP_FILE=c800-universalk9-mz.SPA.153-3.M4.bin
FE0_PORT=AUTO
?=0
BSI=0
RANDOM_NUM=1491046230
RET_2_RTS=06:05:53 UTC Sat Mar 17 2018
RET_2_RCALTS=1521266744
rommon 4 > unset bootflash:
unset: "bootflash:" does not exist
rommon 5 > xmodem -c c800-universalk9-mz.SPA.153-3.M4.bin
monitor: command "xmodem" not found
---------------------------------------------------------------------------
rommon 1 > boot flash:
program load complete, entry point: 0x4000000, size: 0x18c40
boot: cannot determine first executable file name ondevice "flash:"
rommon 4 > dir flash:
program load complete, entry point: 0x4000000, size: 0x18c40
Directory of flash:
Kindly please support anyone..
