We run a number of Cisco 881 routers. We have these all configured to connect back to head office via a VPN tunnel for remote support with no natting.
Recently we have a new requirement. We have a Private network (Not VPN) that we must connect to into the LAN side of our network. It is at a total different ip address scheme than our internal network but all of our internal network traffic 192.168.1.X/24 must nat to a single IP address - 100.65.XXX.254.
Externally our LAN traffic NAT's to 1 single static IP address provided by our ISP.
So question can I NAT all LAN traffic destined for this network to a single IP address on a VLAN?
I would appreciate if it is do able if someone perhaps could provide a configuration example.
Hi!Need to find network devices but not want to open SSH and do show cdp nei, show lldp nei and then need to sh cdp nei gig0/1 det and more.... ?Now You can do from PowerShell.\cdplldp.exe -v v3 -u <SNMPv3 user> -a SHA -w <SNMPv3 authkey> -pp ...
Community Live slides- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Wednesday 11th, December 2019 at 10hrs PDT
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about the Cisco Software-Defined WAN (SD-WAN) solution, its historical roo...
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...