Cisco 9200L switch with essentials licence

[carl.townshend]

Hi All

With a 9200L switch with Network essentials/DNA essentials licence, can we add L3 svi's and static routes on it?

If so what are the limitations?

Many thanks

Carl

[Seb Rupik]

Hi there,

From the datasheet: https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

• IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack.

So the answer is 'yes'.

cheers,

Seb.

[balaji.bandi]

Essential good enough for your requirement, it support good static routing, and also some good OSPF routes too, since it has only 1 path out act as access switch, you are good. (Hope you not expecting any VN here )

here is good :

Stacking

static route

OSPF

Layer 2

Layer 3