cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
160
Views
0
Helpful
5
Replies
Highlighted
Beginner

CISCO 9300 STACK PRIORITY

Does this command exist ?

 

when i type switch ? 

 

i only see switch provision no option for switch priority.

 

my OS is Fuji 16.9.x

5 REPLIES 5
Beginner

Re: CISCO 9300 STACK PRIORITY

switch(config)#switch 1 pri
switch(config)#switch 1 ?
provision Configure Switch provision / offline config

switch(config)#switch 1
VIP Expert

Re: CISCO 9300 STACK PRIORITY

The command is there but you need to issue the command under the "privilege exec" mode and not the global config mode (config t). 

switch 1 priority x

HTH

Hall of Fame Guru

Re: CISCO 9300 STACK PRIORITY

Reza is correct.
Command is there but in Privileged Mode (not config mode).
Beginner

Re: CISCO 9300 STACK PRIORITY

does renumbering the switches in a stack cause the switch to lose its port configurations?
Hall of Fame Guru

Re: CISCO 9300 STACK PRIORITY

Depends.
If there is no configuration for switch 1 and the switch is renumber to switch 1, so yes.
CreatePlease to create content
Content for Community-Ad