Cisco 9407 switchces configured VSS new ports

[kick534]

HI team

Cisco 9407 series configured with VSS in switches every thing working fine.

we configured nearly 10 port channels, in some port channel configuration automatically showing lacp max-bundle 4

please explain ???

interface Port-channel 100
description ***delmonte***
switchport access vlan 10
switchport mode access
lacp max-bundle 4

and some other port also please explain :

Ap1/3/0/1

Ap1/3/0/1

Gi0/0

[Jaime Saldana Morales]

Hi Kick534,

LACP will bundle up to 8 ports (active) what you are configuring with ""lacp max-bundle 4" is that each of your port-channels will allow up to 4 physical ports to form the port-channel.

Hope this helps!

Jaime Saldaña

Cisco Systems

[Reza Sharifi · Accepted solution]

"lacp max-bundle 4" is just stating the number of physical interfaces you can add to that Portchannel. You can always change that or delete it.

see link:

https://www.cisco.com/c/en/us/td/docs/optical/cpt/r9_5/command/reference/cpt95_cr/cpt95_cr_chapter_01000.html#wp9590545320

As for Ap1/3/0/1

That is because most likely your sup is also a Wi-fi controller.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9400-series-switches/nb-06-cat9400-ser-sup-eng-data-sheet-cte-en.html

HTH

[balaji.bandi]

Can you post associated interface config for the PO 100

Ap1/3/0/1

Ap1/3/0/1
Gi0/0

these are APP hosting interface, you can host application inside 9400

[kick534]

we not configured any port channel for below ports

Ap1/3/0/1

Ap1/3/0/1
Gi0/0

by default above port showing in configuration, can you provide any document for it,

and for what purpose we will use gi0/0.