01-15-2020 08:25 AM
Hi
I am replacing a moduler Cisco SVC-ASA-SM1 which is installed on my Cisco 6500 switch, replacing with a Firepower 4120 model (Next generation Firewall),
is there any tool to migrate it ? GUI ?
Or everything needs to be done on CLI from the scratch ?
01-15-2020 11:30 AM
You mean FWSM to FTD ?
there is not straight forward upgrade from FWSM to FTD
you need to do as below :
1. FWSM to ASA 9.X
2. ASA to FTD ( you have migration tool) CCO has access for that tool.
If the rule base not big, i would suggest start manually working on new FTD and do cutover.
01-16-2020 05:08 AM
Thanks for the quick reply, here is some of the details of the device hardware/inventory and software version,
Am I good to use the Migration Tool in this case ?
Source Device
Name: "module 3", DESCR: "WS-SVC-ASASM-1 Adaptive Security Appliance Service Module"
admin# show version
Cisco Adaptive Security Appliance Software Version 9.4(4)36 <context>
Destination Device
Firepower 4120 , Version: Latest (as per Cisco's recommendation)
As per the data sheet of the Cisco Firepower, there are is a list of device that are supported for migration.. and all of them are standalone ASA device.
So just to be sure, can I use the Migration tool for the mentioned source and destination devices ?
01-16-2020 05:48 AM
yes the tool is usefull for you.
As suggested if it less than few hundreds i do manually, how many ACL rules you try to migrate ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide