Cisco Auto-QoS on Cisco 4500

[Oussama.bachiri]

Hi guys,

i wanted to activate auto-qos on my LAN, but when i get to the C4500 i find that the command auto .... is not accepted 

Sh Version :

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.05.03.E RELEASE SOFTWARE (fc1)

is it due to my version ?? i want a confirmation !!

Thanks;;

[Ian Walker]

http://tools.cisco.com/ITDIT/CFN/

[Oussama.bachiri]

so im dead, is there any solution so it can support the auto-qos??

thanks please

[educruz]

Oussama,

If you can provide a complete "show version", that will help more.

Starting with Cisco Release XE 3.3.0(SG) and 15.1(1)SG, the Catalyst 4500 Series Switch supports the "auto qos srnd4" command.

Kind regards,

Ed

[Oussama.bachiri]

Hi Educurz,

okay here is the sh version all of it :)

i don"t know why is not working!!!!

[educruz]

Thank you Oussama,

Due to Auto Qos having 'set' commands ip routing will need to be enabled globally on the
switch. Have you enabled IP routing globally?

Kind regards,

Ed.

[Oussama.bachiri]

yes it is enabled, so what the problem then check this :

CEG01-SWF-1(config)#interface g2/1
CEG01-SWF-1(config-if)#au
CEG01-SWF-1(config-if)#aut
CEG01-SWF-1(config-if)#auto
CEG01-SWF-1(config-if)#auto?
% Unrecognized command
CEG01-SWF-1(config-if)#auto

[ubhnetworking]

switch(config)#int g1/1
switch(config-if)#auto ?
  qos  Configure AutoQoS

switch(config-if)#auto qos ?
  classify  Configure classification for untrusted devices
  trust     Trust the DSCP/CoS marking
  video     Configure AutoQoS for video devices
  voip      Configure AutoQoS for VoIP

Its there. I am on a 4510 with WS-X45-SUP8-E running Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSAL-M), Version 03.03.01.XO RELEASE SOFTWARE 

[Oussama.bachiri]

hi ubhen,

here you go 

CEG01-SWF-1(config)#interface g2/1
CEG01-SWF-1(config-if)#au
CEG01-SWF-1(config-if)#aut
CEG01-SWF-1(config-if)#auto
CEG01-SWF-1(config-if)#auto?
% Unrecognized command
CEG01-SWF-1(config-if)#auto

i did it on my switch , i dont understand

[Oussama.bachiri]

i have a c4506-E with a supervisor : WS-X45-SUP7L-E 

:)