03-15-2023 07:49 AM
I have few cisco classic series switches connected with each other via trunk port config. Having port inconsistency issue at one departmental switch with Core switch. Requesting for some assistance to sort the issue
At core switch I see inconsistency errors for port connected with one particular departmental switch
on Core Switch uplink going to department switch is
interface TenGigabitEthernet1/0/13 description Trunk_Going_2_Deartment_SW switchport mode trunk
on Department switch trunk port going to core switch
interface TenGigabitEthernet1/1/3 description Trunk_UPlink_Going_to_Core_SW switchport mode trunk
on Core Switch , I see errors for the trunk port (connected with departmental switch)
614212: Mar 14 09:11:23: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 9 on TenGigabitEthernet1/0/13 VLAN1.
614213: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_PEER: Blocking TenGigabitEthernet1/0/13 on VLAN0009. Inconsistent peer vlan.
614214: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking TenGigabitEthernet1/0/13 on VLAN0001. Inconsistent local vlan.
614215: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_PEER: Blocking TenGigabitEthernet1/0/13 on VLAN0024. Inconsistent peer vlan.
614216: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_PEER: Blocking TenGigabitEthernet1/0/13 on VLAN0030. Inconsistent peer vlan.
614217: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_PEER: Blocking TenGigabitEthernet1/0/13 on VLAN0040. Inconsistent peer vlan.
614218: Mar 14 09:11:23: %SPANTREE-2-BLOCK_PVID_PEER: Blocking TenGigabitEthernet1/0/13 on VLAN0099. Inconsistent peer vlan.
On Core Switch - Spanning Tree
Core_SW#sh spanning-tree
VLAN0001
Spanning tree enabled protocol rstp
This bridge is the root
VLAN0009
Spanning tree enabled protocol rstp
This bridge is the root
VLAN0024
Spanning tree enabled protocol rstp
This bridge is the root
VLAN0030
Spanning tree enabled protocol rstp
This bridge is the root
VLAN0040
Spanning tree enabled protocol rstp
This bridge is the root
VLAN0099
Spanning tree enabled protocol rstp
This bridge is the rootOn Core Switch - Int Trunk
On CORE Switch - INT TRUNK config
CORE_SW#sh int trunk
Port Mode Encapsulation Status Native vlan
Te1/0/1 on 802.1q trunking 1
Te1/0/2 on 802.1q trunking 1
Te1/0/3 on 802.1q trunking 1
Te1/0/4 on 802.1q trunking 1
Te1/0/6 on 802.1q trunking 1
Te1/0/7 on 802.1q trunking 1
Te1/0/8 on 802.1q trunking 1
Te1/0/9 on 802.1q trunking 1
Te1/0/11 on 802.1q trunking 1
Te1/0/13 on 802.1q trunking 1
Te1/0/16 on 802.1q trunking 1
Te1/0/20 on 802.1q trunking 1
Te1/0/21 on 802.1q trunking 1
Te1/0/22 on 802.1q trunking 1
Gi2/0/9 on 802.1q trunking 1
Gi2/0/10 on 802.1q trunking 1
Gi2/0/11 on 802.1q trunking 1
Gi2/0/13 on 802.1q trunking 1
Gi2/0/14 on 802.1q trunking 1
Gi2/0/24 on 802.1q trunking 1
Gi2/1/2 on 802.1q trunking 1
Gi2/1/3 on 802.1q trunking 1
Gi3/0/1 on 802.1q trunking 1
Gi3/0/4 on 802.1q trunking 1
Gi3/0/8 on 802.1q trunking 1
Gi3/0/19 on 802.1q trunking 1
Gi3/1/1 on 802.1q trunking 1
Gi3/1/2 on 802.1q trunking 1
Port Vlans allowed on trunk
Te1/0/1 1-4094
Te1/0/2 1-4094
Te1/0/3 1-4094
Te1/0/4 1-4094
Te1/0/6 1-4094
Te1/0/7 1-4094
Te1/0/8 1-4094
Te1/0/9 1-4094
Te1/0/11 1-4094
Te1/0/13 1,9,24,30,40,99
Te1/0/16 1-4094
Te1/0/20 1-4094
Te1/0/21 1-4094
Port Vlans allowed on trunk
Te1/0/22 1-4094
Gi2/0/9 1-4094
Gi2/0/10 1-4094
Gi2/0/11 1-4094
Gi2/0/13 1-4094
Gi2/0/14 1-4094
Gi2/0/24 1-4094
Gi2/1/2 1-4094
Gi2/1/3 1-4094
Gi3/0/1 1-4094
Gi3/0/4 1-4094
Gi3/0/8 1-4094
Gi3/0/19 1-4094
Gi3/1/1 1-4094
Gi3/1/2 1-4094
Port Vlans allowed and active in management domain
Te1/0/1 1-2,4,8-24,26,30,40,99
Te1/0/2 1-2,4,8-24,26,30,40,99
Te1/0/3 1-2,4,8-24,26,30,40,99
Te1/0/4 1-2,4,8-24,26,30,40,99
Te1/0/6 1-2,4,8-24,26,30,40,99
Te1/0/7 1-2,4,8-24,26,30,40,99
Te1/0/8 1-2,4,8-24,26,30,40,99
Te1/0/9 1-2,4,8-24,26,30,40,99
Te1/0/11 1-2,4,8-24,26,30,40,99
Te1/0/13 1,9,24,30,40,99
Te1/0/16 1-2,4,8-24,26,30,40,99
Te1/0/20 1-2,4,8-24,26,30,40,99
Te1/0/21 1-2,4,8-24,26,30,40,99
Te1/0/22 1-2,4,8-24,26,30,40,99
Gi2/0/9 1-2,4,8-24,26,30,40,99
Gi2/0/10 1-2,4,8-24,26,30,40,99
Gi2/0/11 1-2,4,8-24,26,30,40,99
Gi2/0/13 1-2,4,8-24,26,30,40,99
Gi2/0/14 1-2,4,8-24,26,30,40,99
Gi2/0/24 1-2,4,8-24,26,30,40,99
Gi2/1/2 1-2,4,8-24,26,30,40,99
Gi2/1/3 1-2,4,8-24,26,30,40,99
Gi3/0/1 1-2,4,8-24,26,30,40,99
Gi3/0/4 1-2,4,8-24,26,30,40,99
Gi3/0/8 1-2,4,8-24,26,30,40,99
Gi3/0/19 1-2,4,8-24,26,30,40,99
Gi3/1/1 1-2,4,8-24,26,30,40,99
Gi3/1/2 1-2,4,8-24,26,30,40,99
Port Vlans in spanning tree forwarding state and not pruned
Te1/0/1 1-2,4,8-24,26,30,40,99
Te1/0/2 1-2,4,8-24,26,30,40,99
Te1/0/3 1-2,4,8-24,26,30,40,99
Te1/0/4 1-2,4,8-24,26,30,40,99
Te1/0/6 1-2,4,8-24,26,30,40,99
Te1/0/7 1-2,4,8-24,26,30,40,99
Te1/0/8 1-2,4,8-24,26,30,40,99
Te1/0/9 1-2,4,8-24,26,30,40,99
Te1/0/11 1-2,4,8-24,26,30,40,99
Te1/0/13 1,9,24,30,40,99
Te1/0/16 1-2,4,8-24,26,30,40,99
Te1/0/20 1-2,4,8-24,26,30,40,99
Te1/0/21 1-2,4,8-24,26,30,40,99
Te1/0/22 1-2,4,8-24,26,30,40,99
Gi2/0/9 1-2,4,8-24,26,30,40,99
Gi2/0/10 1-2,4,8-24,26,30,40,99
Gi2/0/11 1-2,4,8-24,26,30,40,99
Gi2/0/13 1-2,4,8-24,26,30,40,99
Gi2/0/14 1-2,4,8-24,26,30,40,99
Gi2/0/24 1-2,4,8-24,26,30,40,99
Gi2/1/2 1-2,4,8-24,26,30,40,99
Gi2/1/3 1-2,4,8-24,26,30,40,99
Gi3/0/1 1-2,4,8-24,26,30,40,99
Gi3/0/4 1-2,4,8-24,26,30,40,99
Gi3/0/8 1-2,4,8-24,26,30,40,99
Gi3/0/19 1-2,4,8-24,26,30,40,99
Gi3/1/1 1-2,4,8-24,26,30,40,99
Gi3/1/2 1-2,4,8-24,26,30,40,99On Core Switch - VLAN Config
CORE_SW#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Te1/0/5, Te1/0/10, Te1/0/12, Te1/0/14, Te1/0/15, Te1/0/17, Te1/0/18, Te1/0/19, Te1/0/23, Te1/0/24, Gi2/0/1
Gi2/0/3, Gi2/0/4, Gi2/0/5, Gi2/0/6, Gi2/0/7, Gi2/0/8, Gi2/0/12, Gi2/0/15, Gi2/0/16, Gi2/0/17, Gi2/0/18
Gi2/0/19, Gi2/0/20, Gi2/0/21, Gi2/0/22, Gi2/0/23, Gi2/1/1, Gi2/1/4, Gi3/0/2, Gi3/0/3, Gi3/0/5, Gi3/0/6
Gi3/0/7, Gi3/0/9, Gi3/0/10, Gi3/0/11, Gi3/0/12, Gi3/0/13, Gi3/0/15, Gi3/0/16, Gi3/0/17, Gi3/0/18, Gi3/0/20
Gi3/0/21, Gi3/0/22, Gi3/0/23, Gi3/0/24, Gi3/1/3, Gi3/1/4
9 WIFI_MGMT-VLAN active Gi3/0/14
30 ABC-CORP_WIFI active
40 ABC-GUEST_WIFI active
99 ABC-MGMT-VLAN active On Departmental Switch - VLAN config
Department_SW#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4, Gi1/0/5, Gi1/0/6, Gi1/0/7, Gi1/0/8, Gi1/0/10, Gi1/0/11, Gi1/0/12
Gi1/0/13, Gi1/0/14, Gi1/0/15, Gi1/0/16, Gi1/0/17, Gi1/0/18, Gi1/0/19, Gi1/0/20, Gi1/0/21, Gi1/0/22, Gi1/0/23
Gi1/0/24, Gi1/0/25, Gi1/0/26, Gi1/0/27, Gi1/0/28, Gi1/0/29, Gi1/0/30, Gi1/0/31, Gi1/0/32, Gi1/0/33, Gi1/0/34
Gi1/0/35, Gi1/0/36, Gi1/0/37, Gi1/0/38, Gi1/0/39, Gi1/0/40, Gi1/0/42, Gi1/0/43, Gi1/0/44, Gi1/0/45, Gi1/0/47
Gi1/0/48, Gi1/1/1, Gi1/1/2, Te1/1/4
9 vlan9_wifi_mgt active
24 vlan24_wifi active
30 ABC-CORP_WIFI active
40 ABC-GUEST_WIFI active
99 ABC-MGMT-VLAN active On Department Switch - INT TRUNK config
P1_WAREHOUSE-SW-1.3#sh int trunk Port Mode Encapsulation Status Native vlan Gi1/0/9 on 802.1q trunking 1 Gi1/0/41 on 802.1q trunking 1 Gi1/0/46 on 802.1q trunking 1 Te1/1/3 on 802.1q trunking 1 Port Vlans allowed on trunk Gi1/0/9 1-4094 Gi1/0/41 1-4094 Gi1/0/46 1-4094 Te1/1/3 1,9,24,30,40,99 Port Vlans allowed and active in management domain Gi1/0/9 1,9,24,30,40,99 Gi1/0/41 1,9,24,30,40,99 Gi1/0/46 1,9,24,30,40,99 Te1/1/3 1,9,24,30,40,99 Port Vlans in spanning tree forwarding state and not pruned Gi1/0/9 1,9,24,30,40,99 Gi1/0/41 1,9,24,30,40,99 Gi1/0/46 1,9,24,30,40,99 Te1/1/3 1,9,24,30,40,99
03-15-2023 10:36 AM
- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh56485
M.
03-15-2023 10:37 AM
First i would check, is the VTP running on both side as Server, if so make VTP transparent both the sides (if you do not need VTP here)
show vtp - provide you information.
can you post below information : (in text file attachement)
show span summary
show span root
show spann details
=====Preenayamo Vasudevam=====
***** Rate All Helpful Responses *****
03-15-2023 09:03 PM
03-16-2023 04:14 AM
CORE Switch running as VTP Server and Branch running as Transparent.
If you do not need VTP Server, Disable to Transparent.
CORE Switch has different VLAN compare to Branch. try below config and let us know is that fix the issue ?
nterface TenGigabitEthernet1/0/13 description Trunk_Going_2_Deartment_SW
witchport trunk allowed vlan 1,9,24,30,40,99 switchport mode trunk
on Department switch trunk port going to core switch
interface TenGigabitEthernet1/1/3 description Trunk_UPlink_Going_to_Core_SW
witchport trunk allowed vlan 1,9,24,30,40,99 switchport mode trunk
=====Preenayamo Vasudevam=====
***** Rate All Helpful Responses *****
03-16-2023 04:36 AM
you run in one SW RSTP and in other you run R-PVST
these are complete two different STP mode
so you must change from RSTP to R-PVST
03-16-2023 04:21 AM
Unfortunately this morning (before reading this thread), we tried to upgrade the switch firmware as one of other proposed solution, but during upgrade process it got hung & upon rebooting switch became unresponsive at all.
We have replaced the unit with backup switch. Now we are trying to recover the switch & if it works, we will try the VTP transparent at both ends along with suggested cmd's. Thank you very much for the information & I will update this thread soon.
03-16-2023 06:00 AM
Sure - let us know the outcome.
I may be glared looking the text file, i see both running same - where do we see different STP modes here ?
CORE_SW#show span summary
Switch is in rapid-pvst mode
DEPARTMENT_SW#show span summary
Switch is in rapid-pvst mode
=====Preenayamo Vasudevam=====
***** Rate All Helpful Responses *****
03-16-2023 06:06 AM
VLAN0001
Spanning tree enabled protocol rstp
This bridge is the root
I think this Q for me,
sure the summary show R-PVST but for each VLAN I see the mode is RSTP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide