05-04-2021 03:49 AM - edited 05-04-2021 04:21 AM
Hi,
IPSec VPN is supported for the Cisco C1111-8P (1RU) running System image file is "bootflash:c1100-universalk9_ias.16.09.04.SPA.bin"?
If yes, will appreciate a step-by-step guide for the purpose of Site-to-Site VPN configuration?
Solved! Go to Solution.
05-06-2021 02:33 AM
as per show version you have ipbase, you need get security License to work for VPN.
05-04-2021 04:47 AM
You need to have rigtht License to configure VPN :
step by step Guide : (make sure you also need other side device and what encryption it support).
05-05-2021 12:22 AM
Thanks for reply Balaji.
This means this Router do support VPN but needs special license. If I am not mistaken, it is special IOS image you meant?
How I can check if my device has correct license?
Also, there is no indicator of the VPN on the front panel (like an LED that shows if VPN is configured /operational), is this normal?
05-05-2021 03:56 AM
show license feature
show version
05-06-2021 12:05 AM
05-06-2021 02:33 AM
as per show version you have ipbase, you need get security License to work for VPN.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: