Cisco C3750X-48P LICENSE upgrade question.

[CiscoBro]

We have a stack of three

Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 1005.ca98.6300 15 1 Ready
2 Member 6412.25ae.1900 14 1 Ready
3 Member 88f0.3112.7300 13 1 Ready

currently It has ipbase license 

We are planning to upgrade all three switches to ipservices.

I got the liscence and installed it using

license install flash:XXXXX.lic

then i applied to all switch

licence boot level ipservices switch 1

licence boot level ipservices switch 2

licence boot level ipservices switch 3

BUT, i only see 

Next reload license Level: ipservices ON SWITCH1

SWITCH 2 and SWITCH3 still shows

Next reboot licensing Level     : ipbase

ANY idea why upgrade is not applying to switch 2 and switch three?

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

I believe 3750-X licensing installation is tied to a particular device, i.e. not all devices in a stack.

However, I also believe, legally you can run the stack with IP Services (if stack master has it) even if only one stack member has a valid IP Services license.  Of course, without at least one other stack member with the IP Services license, if the stack master fails (the feature set goes with it).