Hi, I have a question regarding operating temperature of the two stacked Cisco C3750X-24T-S.
They are installed in the closed enclosure APC NetShelter AR2100BLK 42U.
The tempreature in the server room about 22 °C, in the enclosure (front) 24 °C, the temperature of the stacked switches is 32 °C:
C3750X#sh env all
FAN 1 is OK
FAN 2 is OK
FAN PS-1 is OK
FAN PS-2 is OK
SYSTEM TEMPERATURE is OK
System Temperature Value: 32 Degree Celsius
System Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold : 60 Degree Celsius
I just wonder is this a normal operating temperature for the switch? I know about data sheet -5ºC to +45ºC, up to 5,000 feet (1500 m), but I have some doubts about long and happy life of these switches working hard in hot environment
What temperature of the environment in the server room and the switch itself do you have? How long are they running without failures?
Here we will go over the configuration needed for MACsec Switch to Switch using a Pre-Shared Key. Topics that will be covered include, command usage, key derivation and key server election. Please see the MACsec History and Terminology for ...
With increased deployments of high-performance connectivity solutions there is need to maximize security, network speed, bandwidth and efficiency. Fiber to the office/desk etc. (FTTx) is not a new concept, however it is viewed as a key pillar in driving t...
What is PON ?
A Passive Optical Network (PON) is a point-to-multipoint architecture which use a single strand of single mode fiber to deliver voice, video, data to several users (or devices). PON network uses passive splitters in the optical distribution ...
This will be the first in a series of documents I write on MACsec. Some of the other topics I’ll be writing are:
As the configuration will become increasingly complex, I suggest you read them in order.
Configuring MACsec Switch to Switch with Pre-...