Cisco C6807 show Logs and don't know what does these logs means

[Amr_Elsherif]

11:48:03.011 FW[MOD 21]: radian_monitor_pll:: port_num[4] unit[2] bcmport[5] : PLL reset failed - xlport_xgxs_status_gen_reg = 0x0  xlport_xgxs_ctrl_reg = 0xFF800

11:48:06.839 FW[MOD 21]: radian_monitor_pll:: port_num[4] unit[2] bcmport[5] : PLL reset failed - xlport_xgxs_status_gen_reg = 0x0  xlport_xgxs_ctrl_reg = 0xFF800

11:48:10.767 FW[MOD 21]: radian_monitor_pll:: port_num[4] unit[2] bcmport[5] : PLL reset failed - xlport_xgxs_status_gen_reg = 0x0  xlport_xgxs_ctrl_reg = 0xFF800

11:48:14.563 FW[MOD 21]: radian_monitor_pll:: port_num[4] unit[2] bcmport[5] : PLL reset failed - xlport_xgxs_status_gen_reg = 0x0  xlport_xgxs_ctrl_reg = 0xFF800

[marce1000]

 https://www.cisco.com/pcgi-bin/Support/Errordecoder/index.cgi

 M.

[Amr_Elsherif]

Thanks for your concern, but the link shows Service is not available.