cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1047
Views
0
Helpful
2
Replies
isaac.manu
Beginner

Cisco Catalyst 2960 series Ports disabled when connecting vmware esx server

I have a Cisco Catalyst 2960 series switch.

When I connect another switch or a VMWare Esx server on one of the ports, the port blinks for few seconds and then goes off.

When I connect a desktop or laptop or a windows server the ports stay led and I can access resources on the network. However, when connect another switch or a vmware esx server, the port is disabled.

What config in the switch can I check to make sure the ports stay on regardless when I connect a desktop / laptop, switch or vmware server?

Thankyou for your help.

Regards

-Isaac Manu

2 REPLIES 2
smehrnia
Rising star

hi,

could u post the show run | inc interface [number] ?

it could be a spanning tree setting, like bpdu guard on the interface.

plz Rate if it helped.

Soroush.

Hope it Helps!

Soroush.
Leo Laohoo
VIP Community Legend

Hi Isaac,

Can you post the output to the following commands:

1.  sh interface ; and

2.  sh interface status err