04-01-2015 10:26 PM - edited 03-07-2019 11:22 PM
Dear team,
we are facing problem in cisco catalyst switch, actually we are using Cisco catalyst 4500e switch, Two month back we upgrade IOS from "cat4500e-ipbasek9-mz.150-2.SG" to cat4500e-ipbasek9-mz.152-2.E1.bin “since i upgrade new IOS that was running perfectly, but last two weeks back unexpectedly switch was rebooted and today also we faced the same problem. here i enclosed the tech support details. kindly check and suggest me the correct solution.
Is there in any bug is there?...... How can we clarify whether the switch is ok on that IOS.....
please suggest me the right IOS image for my cisco catalyst 4500e switch
04-02-2015 03:06 AM
This seems to be hitting the bug
https://tools.cisco.com/bugsearch/bug/CSCuq71667/?reffering_site=dumpcr
Thanks,
Madhu.
04-02-2015 03:12 AM
Hi Ashok,
Looks 15.2.2E2 has the fix. you could try upgrading to it.
Hope this helps.
Please do remeber to rate all useful posts.
Thanks,
Madhu.
04-03-2015 08:56 PM
Do you require any further support?
04-03-2018 07:40 AM
This document explains the step-by-step procedure to upgrade the software image on Catalyst 4500/4000 series switches that run CatOS on Supervisor I and II modules, Cisco IOS® on 4232-L3 module, and Cisco IOS on Supervisor III, IV, and V modules. The software image upgrade is necessary for these reasons: Implement new features in your network which are available in new software releases. Install a new line card that is not supported by the current software version you run on the switch. Fix a known bug that affects your switch if the bug is resolved in the future software release. https://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/27848-179.html.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: