Cisco Catalyst WS-C2960-24TT-L - POE Problem

[Suresh Mannimuni]

We have an Cisco Catalyst WS-C2960-24TT-L ; we would to enable PoE for the access point; 

can anyone please confirm whether this devices can support PoE ?

Show version output

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(55)SE1 C2960-LANBASEK9-M

xxx-xxxxY#sh power inline
Available:0.0(w) Used:0.0(w) Remaining:0.0(w)

Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
xxx-xxxxY#

xxx-xxxxY#sh env power
POWER is OK
xxx-xxxxY#

[Mark Malone]

hI
it say you don't have any power available there for POE ---- Available:0.0(w

You cant just enable its hardware and on by default , it says it on the switch usually somewhere POE

[saifeldin]

HI
this device does not support POE
Kindly check the link below
https://www.cisco.com/c/en/us/products/switches/catalyst-2960-series-switches/models-comparison.html

[Leo Laohoo]

That particular model doesn't support PoE.