Cisco Catayst 3560-24PS-S IOS Upgrade

[Andrea14]

I want to update the IOS for Switch C3560-24PS-S, but I found that the download is no longer available on the Cisco site for this model, but only for the model v2.

Where can I find the latest IOS for this switch?

Thanks in advance.

Andrea

[Leo Laohoo]

The most stable IOS for the 3560/3750 (FastEthernet) is 12.2(55)SE train and the files can be found HERE.

[Andrea14]

Thank you for your answer.

So it is correct to download the IOS although I see that it is for the 3560V2-24PS model and not 3560-24PS?

[Leo Laohoo]

---

@Andrea14 wrote:

So it is correct to download the IOS although I see that it is for the 3560V2-24PS model and not 3560-24PS?

---

No, I did not make a mistake. 

[balaji.bandi]

you can download latest  (it works for both)

12.2.55-SE12

what version you have now, post show version

[Andrea14]

Perfect thanks.
Right now I have version 12.2 (35) SE5

[balaji.bandi]

Sure good to go next version as suggested, thank you for the information.

[Andrea14]

Thanks for your answers.
I updated the switch with version 12.2.55-SE12 IP BASE WITH WEB BASED DEV MGR.
Through console it works, through WEB I see the white screen (see attached image). I tried with Firefox, IE and Chrome even changing pc and operating system the problem is not solved.

Thanks in advance.

Andrea

 

[balaji.bandi]

Not able to co-relate what we see in the picture.

is this upgrade successfully ? or do you have any issue ?

[Andrea14]

The upgrade was successful without any problems.
Now running the show version command I see the updated version:

 

But before the update I was able to access the web interface without any problem. Now, on the other hand, the screen appears to me as in the previous image and I cannot continue.

[balaji.bandi]

Can you post below output put

show version

dir flash:

[Andrea14]

Cat3560_P4b#show ver
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(55)SE12, REL EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:04 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02D00000

ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)

Cat3560_P4b uptime is 2 hours, 31 minutes
System returned to ROM by power-on
System image file is "flash:/c3560-ipbasek9-mz.122-55.SE12/c3560-ipbasek9-mz.122 -55.SE12.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3560-24PS (PowerPC405) processor (revision S0) with 131072K bytes of m emory.
Processor board ID FDO1238X0YM
Last reset from power-on
2 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:23:5D:34:02:80
Motherboard assembly number : 73-9673-11
Power supply part number : 341-0029-05
Motherboard serial number : FDO123803F2
Power supply serial number : LIT12330JMU
Model revision number : S0
Motherboard revision number : A0
Model number : WS-C3560-24PS-S
System serial number : FDO1238X0YM
Top Assembly Part Number : 800-25861-05
Top Assembly Revision Number : B0
Version ID : V07
CLEI Code Number : COMUY10ARA
Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24PS 12.2(55)SE12 C3560-IPBASEK9-M

Configuration register is 0xF

Cat3560_P4b#dir flash:
Directory of flash:/

2 -rwx 676 Mar 1 1993 00:41:25 +00:00 vlan.dat
3 -rwx 3096 Mar 3 1993 00:32:36 +00:00 multiple-fs
503 drwx 192 Mar 3 1993 00:23:04 +00:00 c3560-ipbasek9-mz.122-55.SE12
463 -rwx 1934 Mar 3 1993 00:32:35 +00:00 private-config.text
501 -rwx 3108 Mar 3 1993 00:32:35 +00:00 config.text

15998976 bytes total (557056 bytes free)

[balaji.bandi]

IOS is good and files are there as expected :

Not sure at this stage what went wrong - try below thread may help you

https://community.cisco.com/t5/switching/switch-catalyst-3560g-web-interface-problem/td-p/2558750

[Leo Laohoo]

---

@Andrea14 wrote:

But before the update I was able to access the web interface without any problem. Now, on the other hand, the screen appears to me as in the previous image and I cannot continue.

---

That is a well-known browser issue. 

Managing the switch using the browser is a bad idea because the browser does not have the same functionality as the CLI.