Cisco IOS error

sarenos2006 · ‎12-27-2006

I have this error when I start my router

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Bad RAM at location 0x00000000: wrote 0x00000000, read 0x00000400

Which is the problem? How can I fix it?

ankbhasi · ‎12-27-2006

Hi Friend,

Can you try to reseat the RAM module? The problem is likely being caused by a bad contact, I have seen this before.

Regards,

Ankur

sarenos2006 · ‎12-27-2006

How can I reset the RAM? Is it necessary to remove the cover?

regards

dan-jones · ‎12-30-2006

You will have to open the chassis to access the memory.

You might check on the website of a memory vendor (I like Memoryx.com (http://www.memoryx.net/memory-cisco.html)) and see if they have a layout of the inside of the router (especially where the RAM is).

That will give you an idea of what you will be looking at when you open the chassis.

sarenos2006 · ‎12-31-2006

Thank you very much I have replaced the RAM from other router and now is running correctly.

Regards