cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

298
Views
0
Helpful
4
Replies
Beginner

Cisco Nexus 5596UP Switch

Hi All,

 

We have a Nexus Switch. If we would like to save the configuration, we don't success.

 

The Problem is:

"Nexus1# copy running-config startup-config

####################################### 100%

Configuration update aborted: request was aborted"

 

 

Our information:

 

"Usage for bootflash://sup-local

1173573632 bytes used

  477331456 bytes free

1650905088 bytes total

Nexus1# dir debug:

 

Usage for debug://sup-local

          0 bytes used

   20971520 bytes free

   20971520 bytes total

Nexus1# dir log:

         31    Aug 10 03:26:05 2017  dmesg

          0    Aug 10 03:26:27 2017  libfipf.3369

          0    Aug 10 03:26:34 2017  libfipf.3498

    4194304    Jan 14 14:03:32 2019  messages

          0    Aug 10 03:26:34 2017  snmp_log

        920    Aug 10 03:28:15 2017  startupdebug

       2540    Aug 10 03:28:19 2017  syslogd_ha_debug

 

Usage for log://sup-local

  112836608 bytes used

  306593792 bytes free

  419430400 bytes total

Nexus1# dir modeflash:

No such file or directory

Nexus1# dir modeflash

No such file or directory

Nexus1# dir modflash:

no such file or directory (invalid server)"

 

What I should do?

 

Try the software upgrade to newer? (Now is running the 7.1(3)N1(1))

 

Thanks for your help,

Tamas

 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: Cisco Nexus 5596UP Switch

i see one of the same in reltaed you see the error. but other platform in related to nexus OS.

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc77151/?rfs=iqvred

BB
*** Rate All Helpful Responses ***
4 REPLIES 4
VIP Advisor

Re: Cisco Nexus 5596UP Switch

i see one of the same in reltaed you see the error. but other platform in related to nexus OS.

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc77151/?rfs=iqvred

BB
*** Rate All Helpful Responses ***
Highlighted
VIP Mentor

Re: Cisco Nexus 5596UP Switch

I seen this on my 5ks couple years back known bug , its done the rounds on the NX-OS software , a reboot should resolve it but we ended up upgrading at the same time too, to be sure

Im using this currently on my 5596s no issues with it running long time now

# sh ver | i 5596
cisco Nexus 5596 Chassis ("O2 48X10GE/Modular Supervisor")
# sh ver | i 7
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Module 1: v7.0
kickstart: version 7.3(3)N1(1)
system: version 7.3(3)N1(1)
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.3.3.N1.1.bin
kickstart compile time: 4/27/2018 9:00:00 [04/27/2018 17:18:59]
system image file is: bootflash:///n5000-uk9.7.3.3.N1.1.bin
system compile time: 4/27/2018 9:00:00 [04/27/2018 21:24:41]
Intel(R) Xeon(R) CPU with 8253792 kB of memory.
bootflash: 2007040 kB
Kernel uptime is 170 day(s), 22 hour(s), 58 minute(s), 16 second(s)
Last reset at 279537 usecs after Sat Jul 28 11:26:47 2018
System version: 7.1(4)N1(1)

Beginner

Re: Cisco Nexus 5596UP Switch

Hi,
we have the same problem and the Workaround does not apply for the
Nexus 5596 Chassis with actual SW: system: version 7.3(3)N1(1).

There is no Featur Name ( bash ) available to apply the workaround.

Please advise on a plausable workaround / solution.

Kind Regards,
Scottie

VIP Mentor

Re: Cisco Nexus 5596UP Switch

take a copy of the config, upgrade switch and reapply it then save it will work if no bash or else TAC it with Cisco
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards