cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
36365
Views
55
Helpful
15
Replies
michael.pierson
Beginner

Cisco Part Number Legend

Anyone know where you can get the Cisco part number legend from?

Example:     "WS-C2960-24TT-L"     what do the letters mean after the -24 [TT-L]

15 REPLIES 15
Leo Laohoo
VIP Community Legend

The "TT" stands for the type of uplink.  In this case, it's TWO (2) 10/100/1000BaseTX.

"L" is what kind of image.  In this case it's LAN Base.

http://www.cisco.com/en/US/products/ps6406/prod_models_comparison.html

Thanks leolaohoo for your response.  Is there a legend or documentation anywhere that spells all this out?  How did you come across this information?

How did you come across this information?

Experience.

vaib7av.shirkul
Beginner

WS-C2960-24TT-L
WSWire Speed
CCatalyst
2960/2960GSeries of switches 2960-10/100 and 2960G-10/100/1000 for host.
24Interfaces for host
TTFirst T refers type of host interface, means UTP and second T (both are UTP ports) refers type of uplink interface

if 2960-24TC-L then C   means Combo - SFP and UTP - you can use only one type of interface.

if 2960-24PC-L then P   means PoE port for hosts.
LL for image of switch   L- for LAN BASE  and S - for Lan Lite image.

So there is no any particular documenet where we can find the actual meaning/defination/login behind each word for particular Cisco part number???

I also in search of that document.

Can any one please help out??

So there is no any particular documenet where we can find the actual meaning/defination/login behind each word for particular Cisco part number???

Nope.

Ok, But than how can i get the details for router, wireless, etc.. devices.

For example, can u help me to understand below part numbers?

C1921-3G-G-SEC/K9

AIR-CAP1602i-N-K9

AIR-CAP1602i-N-K9

CAP = Controller-based IOS loaded to the AP

1602 = Wireless Access Point 1600 with dual antennas (hence the "XXX2")

-N = Wireless LAN regulatory domain

K9 = Security.

C1921-3G-G-SEC/K9

CISCO1921 Bundle with HWIC-3G-HSPA-G, Universal Base, 256FL/512DR, Adv Security

hi

from where you get this table Please

Any Cisco authorized document for this naming convention?

Nimesh Patel
Beginner

Is anybody knows  what legends stands for below parts numbers:

WS-C2960S-24PD-L

WS-C2960S-48FPD-L

Both same switches with diff in ports count then why F is missing in WS-C2960S-24PD-L?

Thank you

Both same switches with diff in ports count then why F is missing in WS-C2960S-24PD-L?

"F" means FULL Poe Power.  This "F" can only be found in some selected 48-port switches.  You will not be able to find "F" in 24 ports.

When you see "F", it means that you can push up to 48-ports of 15.4w PoE. 

Hi,

It is really difficult to understand full functionality of device just to see part number however Cisco must provide proper document explaining what LETTER they would be using in part number for what purpose but I could not fine.

 

I have attached that give good idea about that.