cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
176
Views
0
Helpful
5
Replies
Beginner

Cisco Prime 3.1 Coverage, Rogue AP, Reports

Hello All,

 

Can we get wireless coverage report in site map, rogue & busiest AP detection from Prime Infra, 3.1

 

Thanks

Kamlesh

5 REPLIES 5
Rising star

Re: Cisco Prime 3.1 Coverage, Rogue AP, Reports

yes

Beginner

Re: Cisco Prime 3.1 Coverage, Rogue AP, Reports

Hi,

 

Can you send some reference.

 

Thanks

Rising star

Re: Cisco Prime 3.1 Coverage, Rogue AP, Reports

your question is very general, look in these guides

 

Cisco Prime Infrastructure 3.1 User Guide

Cisco Prime Infrastructure 3.1 Reference Guide

 

Highlighted
Beginner

Re: Cisco Prime 3.1 Coverage, Rogue AP, Reports

Hi,

 

I have got the coverage report but some of the APs are showing failed & still performing. What does it mean coverage "failed".

 

Attached is report.

 

Thanks

Rising star

Re: Cisco Prime 3.1 Coverage, Rogue AP, Reports

Hi there,

coverage failed, means that a number of clients connect to an AP with a signal strength lower than a set limit during a percentage of the session. This does not necessarily there is a real problem, or that the client can not work

It indicates fro some devices the connection may be intermittent, so not guaranteed for sustained data-flow.

cause of this may vary, but needs further investigation.

 

a client-session report may give information about what-clients and what access-points are involved.

or monitoring specific clients may give some information.

You need to match this with the physical location where the client is and if this is a location where wireless signal should be available you can expect that the signal is reduced if a  phone is put in the drawer of a desk!

 

This client does not or can not switch over to another access point in, but  keep in mind it is the client driver that decides to "roam" to another access-point. So not in all cases it can be solved bij adding or redistributing access points, sometimes a client driver deeds to be upgraded or configured.

 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards