cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

10368
Views
15
Helpful
22
Replies
Engager

Re: Cisco router 1941 security license

dear

Installing licenses from "flash:FCZ164191GD_20130311062353151.lic"

Installing...Feature:ipbasek9...Failed:

% Error: Duplicate license

Installing...Feature:securityk9_npe...Failed:

% Error: Duplicate license

0/2 licenses were successfully installed

2/2 licenses were existing licenses

0/2 licenses were failed to install

other more thing securityk9_npe is compatible with cisco 1941 router.please help  i will appreciate if you will help me .

thank you

islam kamal

Highlighted
Beginner

Re: Cisco router 1941 security license

You have rebooted the router?

What's the output of:

show license detail

Engager

Re: Cisco router 1941 security license

Dear my friend

i am so thankfull for your support.

RSP#sh license detail

Index: 1        Feature: SSL_VPN                           Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second

        License Count: 0/0  (In-use/Violation)

        License Priority: None

        Store Index: 2

        Store Name: Built-In License Storage

Index: 2        Feature: WAAS_Express                      Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second

        License Count: Non-Counted

        License Priority: None

        Store Index: 4

        Store Name: Built-In License Storage

Index: 3        Feature: datak9                            Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second

        License Count: Non-Counted

        License Priority: None

        Store Index: 1

        Store Name: Built-In License Storage

Index: 4        Feature: ios-ips-update                    Version: 1.0

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

            Period used: 0  minute  0  second

        License Count: Non-Counted

        License Priority: None

        Store Index: 3

        Store Name: Built-In License Storage

Index: 5        Feature: ipbasek9                          Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

        Store Index: 0

        Store Name: Primary License Storage

Index: 6        Feature: securityk9                        Version: 1.0

        License Type: EvalRightToUse

        License State: Active, In Use

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 7  weeks 1  day

            Period used: 1  week  2  days

            Transition date: May 11 2013 13:29:29

        License Count: Non-Counted

        License Priority: Low

        Store Index: 0

        Store Name: Built-In License Storage

Index: 7        Feature: securityk9_npe                    Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

        Store Index: 2

        Store Name: Primary License Storage

Note:the problem is the router can not use the new license securityk9-npe. I need any suggestion.other issue

RSP(config)#license boot module c1900 technology-package ?

  datak9      data technology

  securityk9  security technology

there is no appearance for securityk9-npe.

thank you

islam kamal

Beginner

Re: Cisco router 1941 security license

Are you running a universalk9_npe IOS version?

In your initial posting you appear to have IOS image  c1900-universalk9-mz.SPA.151-4.M4.bin installed.

Have you tried this with the NPE image c1900-universalk9_npe-mz.SPA.151-4.M4.bin?

Engager

Re: Cisco router 1941 security license

Dear

not yet , i will try and i will tell you the feedback.

Thank you

Beginner

Cisco router 1941 security license

Hi,

Faced a similar problem
the issue is that CISCO1941/K9 is coming with IOS with No Pay Load Encryption.
You need to upgrade the IOS before security feature is enabled.

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1176474

Plz mark as correct solution.

Beginner

Re: Cisco router 1941 security license

Try using the below command. Faced similar issue below command resolved the same.

Thanks

Rakesh

Beginner

Re: Cisco router 1941 security license

Try using the below command. Faced similar issue below command resolved the same.

license boot module c1900 technology-package securityk9

Thanks

Rakesh

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards