Currently I have problems with Cisco SG350 model, in these I configure its ports in Access mode with a specific vlan, but after they are turned off or restart by electrical issues, all its ports lose configuration and are automatically put in trunk mode with all the vlan declared in the switch, this only happens to me with this specific model, does anyone know how I can solve so that the configuration is not changed when restarting?
we try updating the firmware but the issue persists
Enterprise Routing Business Unit is glad to announce Beta release 16.12.2 for all Routing Platforms such as ASR1K, ISR1K, ISR4K, ISRv, CSR1K Platforms. This release is made available to allow users to test, evaluate and share fee...
Meet the Authors Event - Peter Paluch, Co-author of CCIE Routing and Switching v5.0 Official Cert Guide, Volume 1
(Live event – Wednesday, October 30th, 2019 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This will have place on Wednesday 30...
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
Cisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnec...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40