Cisco SG350X switch - SNMP Server configuration

[Yasmeen]

Hi Team

        I want to monitor my LAN switches with SNMP Protocol. We are using Zabbix tool to monitor the switch IP's

I Want to configure SNMP server On Cisco SG350X Switch. kindly send me the Cli commands.

Thanks,

Yasmeen Shaul Hameed.

[Jitendra Kumar]

Hi,

You can follow the below documents for the SNMP config

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-250-series-smart-switches/smb2673-configure-simple-network-management-protocol-snmp-communitie.html

Thanks,

Jitendra

[Georg Pauwen]

Hello,

here is the link to the CLI reference. Section 43 lists all snmp related commands:

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/350xg/cli_guide/CLI_Tesla_SG350X_SG350XG_2_2_5.pdf

[balaji.bandi]

You looking command level use below guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/csbms/CBS_250_350/CLI/cbs-350-cli-/snmp-commands.html

if you looking to monitor non standard, you may need to download MIB related to product from software.cisco.com