Cisco SM-ES3G-16-P no valid license found but the card still works?
Hi, I've inherited some cisco2951 and cisco2911 routers with SM-ES3G-16-P installed. And I have noticed something worrisome - the switches are indicating missing licenses.
License Level: ipbase
License Type: Default. No valid license found.
Next reload license Level: ipbase
cisco SM-ES3G-16-P (PowerPC405) processor with 131072K bytes of memory.
Processor board ID FOC15060Q3M
Last reset from power-on
1 Virtual Ethernet interface
18 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
This is the software version the switches are running :
you might be hitting the bug below. Workaround is to reinstall the license (license install):
SM-ES3-16-P "ipbase" license display issue CSCun09037 Description Symptom: SM-ES3-16-P's default license is "ipbase". But the ipbase license on SM-ES3-16-P displayed "No valid license found" from show version.
--show version--- License Level: ipbase License Type: Default. No valid license found.<<<< Next reload license Level: ipbase
2900#show license Index 1 Feature: advipservices Period left: 0 minute 0 second Index 2 Feature: ipservices Period left: 8 weeks 4 days License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Priority: None License Count: Non-Counted
Index 3 Feature: ipbase <<<< Period left: 0 minute 0 second <<<<<
Workaround: reinstall ipbase license on SM module.
I thought so too, but the routers are running 15.0 image. It seems that there is something else wrong with the modules. Is there a way to get an ipbase license for those ? I couldn't find the SKU for ipbase licenses.
Cisco Champion Radio · S7|E45 Network Insights with AI Endpoint Analytics
Identifying who and what is on the network is a challenge for many organizations. Incomplete visibility makes it difficult to implement advanced security policies and recommendatio...
HI, In the attached diagram from cisco site if we assume R101 and R102 are two DC having a layer 2 link and both are advertising same subnet (eg. 192.168.12.0/24) to the ISP i understand by using BGP metrics we can make one DC primary and other as se...
Question I am having trouble pulling DHCP from a given network. I am fairly new at DHCP servers and I am trying to understand how IP addresses work within these servers. The objective is to give DHCP to my 6 PC's on my main network. I can either...
Hello, I was doing a packet tracer lab. Everything was fine, working, then suddenly it freezed. I closed the window. Now everytime I open this file, it freezes. I uninstalled it and reinstall, still the same. Tried with an older version, keeps crashi...
Can someone share me the test cases related to SDA after migrating the site from traditional network to SDA network. what test point should be considered/tested after the migrating on SDA network. Please share the test case point.