cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

5959
Views
0
Helpful
4
Replies
Highlighted
Beginner

Cisco Supervisor 7L-E USB Port is not working

Nothing happens when we plug a USB Flash Drive into an SUP7L-E USB port. Does anybody know if this works?

Regards

Manuel

Everyone's tags (5)
4 REPLIES 4
Highlighted
Hall of Fame Mentor

Cisco Supervisor 7L-E USB Port is not working

Highlighted
Beginner

Re: Cisco Supervisor 7L-E USB Port is not working

Then this should work :

« A standard USB 2.0 device such as a flash memory device can plug into this connector. »

Is there only a specific typ supported ?

Regards

Manuel

Von: ediortiz

Gesendet: Mittwoch, 2. Mai 2012 16:22

An: Linder Manuel (CASSARiUS AG)

Betreff: - Re: Cisco Supervisor 7L-E USB Port is not working

Home<>

Re: Cisco Supervisor 7L-E USB Port is not working

created by Edison Ortiz<> in LAN, Switching and Routing - View the full discussion<>

Highlighted
Hall of Fame Mentor

Cisco Supervisor 7L-E USB Port is not working

Try formatting the USB with FAT32.

Highlighted
Hall of Fame Community Legend

Cisco Supervisor 7L-E USB Port is not working

Nothing happens when we plug a USB Flash Drive into an SUP7L-E USB port. Does anybody know if this works?

Yes it will work and it will depend entirely on the following factors:

1.  NOT ALL USB are supported.  The best way to check is insert the USB stick and perform the command "sh log".  If you get the log entry in the words like "USB inserted" and nothing negative then it's going to work;

2.  Format using FAT16;

3.  Sup7?  I didn't have the chance to test but it should support up to 8 to 16 Gb size USB sticks. 

CreatePlease to create content
Content for Community-Ad