cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
206
Views
0
Helpful
2
Replies
aditya deshmukh
Beginner

Cisco Switch Model with 24 Ethernet 1000 Mbps and 24 SFP 1000 Mbps ports

Hello Everyone,

Please suggest Cisco Switch Model with 24 Ethernet 1000 Mbps + 24 SFP 1000 Mbps ports in single chassis?

1 ACCEPTED SOLUTION

Accepted Solutions
Philip D'Ath
Advisor

You should probably use the new Cisco Catalyst C9407R Chassis.  These are replacing the 4507R.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9400-series-switches/datasheet-c78-739053.html

Another option would be to use a 48 port SFP/SFP+ switch and put in 24 x 1000BaseT SFP's.

You could consider a Cisco Nexus 3548 (which has SFP+).

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3548-switch/data_sheet_c78-707001.html

If you dropped the requirements of a single chassis you could use a stacked pair of Cisco 3850's.

View solution in original post

2 REPLIES 2
Philip D'Ath
Advisor

You should probably use the new Cisco Catalyst C9407R Chassis.  These are replacing the 4507R.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9400-series-switches/datasheet-c78-739053.html

Another option would be to use a 48 port SFP/SFP+ switch and put in 24 x 1000BaseT SFP's.

You could consider a Cisco Nexus 3548 (which has SFP+).

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3548-switch/data_sheet_c78-707001.html

If you dropped the requirements of a single chassis you could use a stacked pair of Cisco 3850's.

Thanks Philip !

We are going for Cisco Nexus 3548 (which has SFP+).